Insulation may not be the most glamorous home improvement project, but it is one of the most cost-effective. It keeps warm air inside the house during the winter and cool air in during the summer, thereby saving energy use and decreasing your utility bills.

The type of attic insulation  you choose and the R-value, which is a measure of how much heat the material prevents per inch, will influence your overall cost. The Department of Energy recommends an R-value of at least R-30 for most homes, but higher R-values are best in colder climates.

Using the right type of attic insulation can significantly impact your comfort and the cost of heating and cooling your home. However, determining the proper attic insulation for your home isn’t an easy task. It requires a thorough inspection of your attic and your home’s construction. Then, a professional insulation installer can recommend the most suitable attic insulation for your home.

Seal it Right: The Ultimate Guide to Choosing Advanced Seal Spray Foam Insulation

The most common attic insulation is fiberglass batts and blankets, which are inexpensive, easily accessible and effective. However, they contain airborne fiberglass, which can be unhealthy to inhale, so homeowners should take care not to touch the insulation or disturb it once it’s installed. Loose-fill attic insulation — cellulose, sprayed foam or rock wool — is more expensive than fiberglass but is the most effective for soundproofing and thermal control. It must be applied with a blowing machine, which may be available for rent at some home improvement stores. Professionals will wear safety gear when installing loose-fill attic insulation, including a face mask and eye protection. They’ll also make sure any exhaust from the attic is directed to the exterior, to avoid moisture retention that can ruin the insulation.

Advanced Seal Spray Foam Insulation
5190 West 750 South, Rossville, IN 46065
765-404-3638